MIL-STD-962D
w/CHANGE 1
heading shall identify other types of Government documents, drawings, and publications, if applicable.
5.8.2.1 Government specifications, standards, and handbooks. Government specifications, standards, and handbooks shall be listed by document identifier and title. Documents shall exclude the revision letters, suffix (preparing activity symbols), and the "00" designation for interim specifications. Titles shall be taken from the documents rather than an index. Government specifications, standards, and handbooks shall be listed numerically (except federal specifications, which shall be listed alphanumerically) under the following headings in the order shown, as appropriate:
INTERNATIONAL STANDARDIZATION AGREEMENTS FEDERAL SPECIFICATIONS
FEDERAL STANDARDS
FEDERAL INFORMATION PROCESSING STANDARDS COMMERCIAL ITEM DESCRIPTIONS
DEPARTMENT OF DEFENSE SPECIFICATIONS DEPARTMENT OF DEFENSE STANDARDS DEPARTMENT OF DEFENSE HANDBOOKS
5.8.2.1.1 Standards shall include the following paragraph as 2.2.1 if specifications, standards, and handbooks are to be listed as applicable documents:
"2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract."
5.8.2.1.2 The parenthetical source statement below shall follow the listing of Govern- ment specifications, standards, and handbooks. The ASSIST database shall be checked to verify that all of the listed Government specifications, standards, and handbooks are in the ASSIST database. If they are not, contact the DoD Single Stock Point to determine if the missing documents can be included in ASSIST and what action must be taken. If the documents are not in the ASSIST database and they cannot be included in the database, the source for obtaining these documents shall be included.
"(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)"
5.8.2.1.3 When listing FED-STD-595 in section 2, include the specific color chip(s) required by the standard rather than listing the entire federal standard. See figure 2 for example of how to list FED-STD-595. (NOTE: FED-STD-595 is not included in section 2 of this standard since it is not a requirement for this standard.)
5.8.2.2 Other Government documents, drawings, and publications. The following types of documents shall be listed after the paragraph of 2.2.1 above, in appropriate order (numerically
21
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business