MIL-STD-962D
w/CHANGE 2
MIL-STD-123B
w/CHANGE 2
1. SCOPE
1.1. Scope. This standard covers the procedures for ultrasonic inspection of bar stock selected for the manufacture of bearing balls used in armored vehicles.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or
5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-123 - Ultrasonic Inspection Definitions
(Copies of this document are available online at https://quicksearch.dla.mil.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence unless otherwise noted. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
1
FIGURE 7. Example of change to standard - Continued.
49
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business