MIL-STD-962D
w/CHANGE 2
address, an email address, and reference to the ASSIST database. This information may be omitted for standards with classified or sensitive information if there are security concerns.
"Comments, suggestions, or questions on this document should be addressed to (fill in mailing address) or emailed to (fill in email address). Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.dla.mil."
5.6 Contents page. The contents page shall be on the page following the foreword. The single word "CONTENTS" in capital letters shall head the contents page. The contents page shall include section, paragraph, figure, table, and appendix numbers or letters and titles, as appropriate; and an index, if used, and the page numbers to locate them. See the contents page of this standard for an example.
5.7 SECTION 1 - SCOPE.
5.7.1 Scope. Section 1 shall include a scope that briefly states the coverage of the standard. Section 1 may also include paragraphs on the standard's purpose, applicability, and classifications of items, materials, methods, practices, or processes. This section shall not contain requirements. Figure 1 provides an example of a scope.
5.7.2 Classification. When applicable, types, grades, classes, or other classifications shall be listed under this heading in section 1 and shall be in accordance with accepted industry practice (see figure 1). The same designation shall be used throughout the standard. When more than one type, grade, class, or other classification is listed, each shall be briefly defined. The classification should remain constant from revision to revision of the standard. When the characteristics of an item change enough to affect interchangeability, the original designation shall be deleted and a new classification added. If it becomes necessary to change the
designation without changing the characteristics of the item, a cross-reference shall be included in the "NOTES" section indicating the relationship between the old and new designations. This cross-reference shall remain in "NOTES" section in all successive revisions identifying designations in all revisions since the original designation change. Such changes shall be kept to a minimum.
5.8 SECTION 2 - APPLICABLE DOCUMENTS.
5.8.1 Listing of applicable documents. Section 2 shall list only those documents referenced in sections 3, 4, or 5 of the standard that are needed to meet requirements or provide useful information for meeting requirements (see figure 2). If a document is only cited as an example or for background information, it does not have to be listed in section 2. For the types of documents that may be referenced in standards, see 4.19. The first paragraph in section 2 shall be as follows:
"2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business