MIL-STD-962 Defense Standards Format And ContentThis standard establishes the format and content requirements for the preparation of standards prepared either by DoD activities or by contractors for the DoD.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80

MIL-STD-962D

w/CHANGE 2

5.19.7.4  FSC, FSG, or area designation.  The FSC, FSG, or area designation shall be the same as for the basic standard and shall be shown in the lower right corner of the first page.

5.19.7.5  Concluding material.  The concluding material for all notices shall be in accordance with 5.13.

5.19.7.6  Project number.  Project numbers are not required for administrative notices.

6.  NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)

6.1  Intended use.  Standards covered by this standard are intended for use in acquisition to establish requirements for military-unique interfaces, processes, practices, methods, and other engineering or technical criteria.  Non-Government standards or commercial item descriptions should be used to describe the requirements for commercial interfaces, processes, practices, and methods.

6.2  Acquisition requirements.  Acquisition documents should specify the title, number, and date of this standard.

6.3  Associated Data Item Descriptions (DIDs).  This standard has been assigned an Acquisition Management Systems Control number authorizing it as the source document for the following DIDs.  When it is necessary to obtain the data, the applicable DIDs must be listed on the Contract Data Requirements List (DD Form 1423).

DID Number               DID Title

DI-SDMP-81470        Department of Defense (DoD) Interface Standard Documents

DI-SDMP-81472        Department of Defense (DoD) Design Criteria Standard Documents

DI-SDMP-81474        Department of Defense (DoD) Standard Practice Documents

DI-SDMP-81475        Department of Defense (DoD) Test Method Standard Documents

DI-SDMP-81476        Department of Defense (DoD) Manufacturing Process Standard

Documents

The above DIDs were current as of the date of this standard.  The ASSIST database should be researched at https://quicksearch.dla.mil to ensure that only current and approved DIDs are cited on the DD Form 1423.

6.4  Tailoring guidance.  To ensure proper application of this standard, invitation for bids, request for proposals, and contractual statements of work should tailor the requirements in

35